Rated Capacity 1000 kVA Cast Resin Dry Type Transformers 12kv 11kv

Structural Design: The core is usually formed by stacking high-magnetic-conductivity silicon steel sheets. A new process of five-step stepwise lap joints is adopted, which can reduce no-load loss and noise.
High and low voltage windings are cast in epoxy resin under vacuum conditions. The high-voltage windings are usually wound with high-strength glass fibers, while the low-voltage windings are wound with copper foil. They have high mechanical strength and electrical strength.
Insulation and Cooling: The cooling medium is air, and it relies on natural convection or forced air cooling for heat dissipation. The epoxy resin encapsulated windings not only provide good insulation but also prevent moisture and dust, reducing the risk of fire.
Performance Advantages: It has the characteristics of low loss, low noise, and low partial discharge. It has good energy-saving effect and is economical to operate. It has strong anti-short-circuit capability, high resistance to lightning impact, excellent moisture resistance, and can be put into operation without pre-drying after shutdown. It can also be equipped with temperature monitoring and protection systems, with functions such as fault and over-temperature alarm, enabling remote monitoring by a microcomputer.
Application Scenarios: It can be directly installed at the load center and is suitable for places such as high-rise buildings, airports, docks, power plants, residential areas or complete substations, especially suitable for environments with requirements for fire prevention, explosion prevention, and moisture resistance.